商品介紹：

機型 PLC 中板拼板機，專門處理 1.2~4.5mm 厚度不同之不定尺長中板薄片，由進料、輾壓、電子檢測、邊緣剪切、沾膠拼接成之定尺長中板，經自動收板架收板整平，全自動一貫作業。

THIS MACHINE IS PARTICULAR TO JOINT THE IRREGULAR SIZE OF LONG/SHORT CORE VENEER BY THE DIFFERENT THICKNESS 1.2~4.5mm. THE CONSISTENT OPERATION IS FULLY AUTOMATIC FROM FEEDING, TENDERIZING, ELECTRONIC INSPECTION, CLIPPING, GLUE JOINTING AND COLLECTING. 

本機進料速度為 24M / min ~ 33M / min 可配合產量需要，自由調整，大幅提高生產量。

CONVEYING SPEED OF THE MACHINE IS ADJUSTABLE FROM 24M / MIN. TO 33M / MIN. THAT WILL INCREASE THE PRODUCTION LARGER THAN THE TRADITIONAL.

邊緣剪切廢料計算，採用發波器配合高速計數器控制，每次均以最小廢料減切，不會浪費中板，提升中板利用率。最小剪切寬度為75mm。

THE EDGE CLIPPING AND WASTE VENEER COUNTING ARE CONTROLLED BY THE PRECISION ROTARY ENCODER AND HIGH SPEED COUNTER IN ORDER TO CLIP THE LEAST WASTE VENEER WITHOUT ANY WASTE OF CORE VENEER. THE MINIMUM CLIPPING WIDTH IS 75mm. 

本機採用 PLC 控制，操作簡單，並設計前後拼接同步系統，單板拼接精準。改善重疊現象，成品不會有夾心，降低格外率，提升產品附加價值。

OPERATION SYSTEM IS CONTROLLED BY THE PLC SYSTEM, WHICH IS MUCH EASIER TO OPERATE. THE FRONT AND REAR JOINTING ARE SYNCHRONIZED THAT MAKES THE VENEER JOINTED VERY PRECISELY IN ORDER TO PREVENT OVERLAPPING.

產品影片：